BGP DMZ Link Bandwidth for Unequal Cost Recursive Load Balancing 65
BFD Multihop Support for BGP 65
BGP Multi-Instance and Multi-AS 65
BGP Prefix Origin Validation Based on RPKI 66
Configuring RPKI Cache-server 66
Configuring RPKI Prefix Validation 69
Configuring RPKI Bestpath Computation 70
BGP 3107 PIC Updates for Global Prefixes 71
BGP Prefix Independent Convergence for RIB and FIB 72
BGP Update Message Error Handling 72
BGP Attribute Filtering 73
BGP Attribute Filter Actions 73
BGP Error Handling and Attribute Filtering Syslog Messages 73
BGP Link-State 74
BGP Permanent Network 74
BGP-RIB Feedback Mechanism for Update Generation 75
BGP VRF Dynamic Route Leaking 75
User Defined Martian Check 76
Resilient Per-CE Label Allocation Mode 77
BGP Multipath Enhancements 77
MVPN with BGP SAFI-2 and SAFI-129 77
BGP Monitoring Protocol 78
How to Implement BGP 79
Enabling BGP Routing 79
Configuring Multiple BGP Instances for a Specific Autonomous System 81
Configuring a Routing Domain Confederation for BGP 82
Resetting an eBGP Session Immediately Upon Link Failure 83
Logging Neighbor Changes 84
Adjusting BGP Timers 84
Changing the BGP Default Local Preference Value 85
Configuring the MED Metric for BGP 86
Configuring BGP Weights 86
Tuning the BGP Best-Path Calculation 88
Indicating BGP Back-door Routes 89
Configuring Aggregate Addresses 90
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
vi
Contents