Cisco Catalyst 2950 Software Guide

2-3
Catalyst 2950 Desktop Switch Software Configuration Guide
78-11380-03
Chapter 2 Getting Started with CMS
Features
• Two levels of access to the configuration options: read-write access for users allowed to change
switch settings; read-only access for users allowed to only view switch settings
• Consistent set of GUI components (such as tabs, buttons, drop-down lists, tables, and so on) for a
consistent approach to setting configuration parameters
Figure 2-1 CMS Features
Menu bar
Toolbar
Move the cursor over
the icon to display the
tool tip. For example,
the button displays
the legend of icons
and color codes.
Click Guide or
Expert interaction
mode to change how
some configuration
options will be
presented to you.
65282
Front Panel view of
the cluster.
Topology view of
the cluster.
cluster1
65717

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz