Cisco Catalyst 3750-E - Page 11

Contents
xi
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Default SSL Configuration 9-51
SSL Configuration Guidelines 9-52
Configuring a CA Trustpoint 9-52
Configuring the Secure HTTP Server 9-53
Configuring the Secure HTTP Client 9-54
Displaying Secure HTTP Server and Client Status 9-55
Configuring the Switch for Secure Copy Protocol 9-55
Information About Secure Copy 9-56
CHAPTER 10 Configuring IEEE 802.1x Port-Based Authentication 10-1
Understanding IEEE 802.1x Port-Based Authentication 10-1
Device Roles 10-3
Authentication Process 10-4
Authentication Initiation and Message Exchange 10-6
Authentication Manager 10-8
Port-Based Authentication Methods 10-8
Per-User ACLs and Filter-Ids 10-9
Authentication Manager CLI Commands 10-9
Ports in Authorized and Unauthorized States 10-11
802.1x Authentication and Switch Stacks 10-11
802.1x Host Mode 10-12
802.1x Multiple Authentication Mode 10-13
MAC Move 10-13
MAC Replace 10-14
802.1x Accounting 10-15
802.1x Accounting Attribute-Value Pairs 10-15
802.1x Readiness Check 10-16
802.1x Authentication with VLAN Assignment 10-16
802.1x Authentication with Per-User ACLs 10-18
802.1x Authentication with Downloadable ACLs and Redirect URLs 10-19
Cisco Secure ACS and Attribute-Value Pairs for the Redirect URL 10-20
Cisco Secure ACS and Attribute-Value Pairs for Downloadable ACLs 10-20
VLAN ID-based MAC Authentication 10-21
802.1x Authentication with Guest VLAN 10-21
802.1x Authentication with Restricted VLAN 10-22
802.1x Authentication with Inaccessible Authentication Bypass 10-23
Support on Multiple-Authentication Ports 10-23
Authentication Results 10-23
Feature Interactions 10-24