Cisco Catalyst 3750-E - Monitoring and Maintaining Wccp

45-10
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Chapter 45 Configuring Cache Services By Using WCCP
Monitoring and Maintaining WCCP
Monitoring and Maintaining WCCP
To monitor and maintain WCCP, use one or more of the privileged EXEC commands in Table 45-2:
Ta b l e 45-2 Commands for Monitoring and Maintaining WCCP
Command Purpose
clear ip wccp w
eb-cache Removes statistics for the web-cache service.
show ip wccp web-
cache Displays global information related to WCCP.
show ip wccp web-
cache detail Displays information for the switch and all application engines in the
WCCP cluster.
show ip interface Displays status about any IP WCCP redirection commands that are
co
nfigured on an interface; for example,
Web Cache Redirect is
enabled / disabled.
show ip wccp web-cache view Displays which other members have or have not been detected.