Cisco Catalyst 3750-E - Displaying the Mst Configuration and Status

19-27
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Chapter 19 Configuring MSTP
Displaying the MST Configuration and Status
Displaying the MST Configuration and Status
To display the spanning-tree status, use one or more of the privileged EXEC commands in Table 19-5:
For information about other keywords for the sho
w spanning-tree privileged EXEC command, see the
command reference for this release.
Ta b l e 19-5 Commands for Displaying MST Status
Command Purpose
show spanning-tree mst configuration Displays the MST region configuration.
show spanning-tree mst configuration digest Displays the MD5 digest included in the current MSTCI.
show spanning-tree mst in
stance-id Displays MST information for the specified instance.
show spanning-tree mst interface in
terface-id Displays MST information for the specified interface.