Index
IN-42
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
overview 31-1
statistics
collecting group Ethernet
31-6
collecting group history 31-5
support for 1-16
root guard
described
20-10
enabling 20-18
support for 1-8
root switch
MSTP
19-18
STP 18-16
route calculation timers, OSPF 40-34
route dampening, BGP 40-63
routed packets, ACLs on 35-40
routed ports
configuring
40-5
defined 12-4
in switch clusters 6-8
IP addresses on 12-32, 40-5
route-map command 40-100
route maps
BGP
40-55
policy-based routing 40-98
router ACLs
defined
35-2
types of 35-4
route reflectors, BGP 40-62
router ID, OSPF 40-35
route selection, BGP 40-53
route summarization, OSPF 40-33
route targets, VPN 40-78
routing
default
40-3
dynamic 40-3
redistribution of information 40-95
static 40-3
routing domain confederation, BGP 40-62
Routing Information Protocol
See RIP
routing protocol administrative distances
40-93
RPS
See Cisco Redundant Power System 2300
RPS 2300
See Cisco Redundant Power System 2300
RSPAN
30-3
and stack changes 30-11
characteristics 30-9
configuration guidelines 30-19
default configuration 30-12
destination ports 30-8
displaying status 30-31
in a switch stack 30-3
interaction with other features 30-10
monitored ports 30-7
monitoring ports 30-8
overview 1-15, 30-1
received traffic 30-6
session limits 30-13
sessions
creating
30-20
defined 30-4
limiting source traffic to specific VLANs 30-22
specifying monitored ports 30-20
with ingress traffic enabled 30-25
source ports 30-7
transmitted traffic 30-6
VLAN-based 30-7
RSTP
active topology
19-9
BPDU
format
19-12
processing 19-13
designated port, defined 19-9
designated switch, defined 19-9
interoperability with IEEE 802.1D
described
19-8
restarting migration process 19-26
To Next Page
Loading...
