Index
IN-45
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
SNMPv2C 33-2
SNMPv3 33-2
snooping, IGMP 24-2
software compatibility
See stacks, switch
software images
location in flash
B-26
recovery procedures 49-2
scheduling reloads 3-24
tar file format, described B-26
See also downloading and uploading
software images in mixed stacks
See the Cisco Software Activation and Compatibility
Document
source addresses
in IPv4 ACLs
35-12
in IPv6 ACLs 36-5
source-and-destination-IP address based forwarding,
EtherChannel
38-9
source-and-destination MAC address forwarding,
EtherChannel
38-9
source-IP address based forwarding, EtherChannel 38-9
source-MAC address forwarding, EtherChannel 38-8
Source-specific multicast
See SSM
SPAN
and stack changes
30-11
configuration guidelines 30-13
default configuration 30-12
destination ports 30-8
displaying status 30-31
interaction with other features 30-10
monitored ports 30-7
monitoring ports 30-8
overview 1-15, 30-1
ports, restrictions 26-12
received traffic 30-6
session limits 30-13
sessions
configuring ingress forwarding
30-17, 30-26
creating 30-14, 30-28
defined 30-4
limiting source traffic to specific VLANs 30-18
removing destination (monitoring) ports 30-15
specifying monitored ports 30-14, 30-28
with ingress traffic enabled 30-16
source ports 30-7
transmitted traffic 30-6
VLAN-based 30-7
spanning tree and native VLANs 13-17
Spanning Tree Protocol
See STP
SPAN traffic
30-6
split horizon, RIP 40-23
SRR
configuring
shaped weights on egress queues
37-89
shared weights on egress queues 37-90
shared weights on ingress queues 37-82
described 37-15
shaped mode 37-15
shared mode 37-16
support for 1-13
SSH
configuring
9-46
described 1-7, 9-45
encryption methods 9-45
switch stack considerations 5-17
user authentication methods, supported 9-45
SSL
configuration guidelines
9-52
configuring a secure HTTP client 9-54
configuring a secure HTTP server 9-53
described 9-49
monitoring 9-55
SSM
address management restrictions
46-16
CGMP limitations 46-16
components 46-14