5-5
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Chapter 5 Managing Switch Stacks
Understanding Switch Stacks
Figure 5-2 Adding a Standalone Switch to a Switch Stack
Stack Master Election and Re-Election
The stack master is elected or re-elected based on one of these factors and in the order listed:
1. The switch that is currently the stack master.
2. The switch with the highest stack member priority value.
Note We recommend assigning the highest priority value to the switch that you prefer to be the
stack master. This ensures that the switch is re-elected as stack master if a re-election occurs.
3. The switch that is not using the default interface-level configuration.
157553
Stack member 1
Stack member 2
and stack master
Stack member 3
Stack member 4
Stack member 1
Stack member 2
and stack master
Stack member 3
Stack member 1
To Next Page
Loading...
