Index
IN-54
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
upgrading information
See release notes
upgrading software images
See downloading
UplinkFast
described
20-3
disabling 20-16
enabling 20-15
support for 1-8
uploading
configuration files
preparing
B-11, B-14, B-17
reasons for B-9
using FTP B-16
using RCP B-19
using TFTP B-13
image files
preparing
B-28, B-31, B-36
reasons for B-25
using FTP B-34
using RCP B-38
using TFTP B-30
User Datagram Protocol
See UDP
user EXEC mode
2-2
username-based authentication 9-6
V
version-dependent transparent mode 14-4
version-mismatch (VM) mode
automatic upgrades with auto-upgrade
5-12
described 5-11
displaying 5-12
manual upgrades with auto-advise 5-12
upgrades with auto-extract 5-12
virtual IP address
cluster standby group
6-11
command switch 6-11
Virtual Private Network
See VPN
virtual router
42-1, 42-2
virtual switches and PAgP 38-6
vlan.dat file 13-4
VLAN 1
disabling on a trunk port
13-20
minimization 13-19
VLAN ACLs
See VLAN maps
vlan-assignment response, VMPS
13-26
VLAN configuration
at bootup
13-7
saving 13-7
VLAN configuration mode 2-2
VLAN database
and startup configuration file
13-7
and VTP 14-1
VLAN configuration saved in 13-6
VLANs saved in 13-4
vlan dot1q tag native command 17-5
VLAN filtering and SPAN 30-8
vlan global configuration command 13-6
VLAN ID, discovering 7-31
VLAN link state 12-5
VLAN load balancing on flex links
configuration guidelines
21-8
described 21-2
VLAN management domain 14-2
VLAN Management Policy Server
See VMPS
VLAN map entries, order of
35-31
VLAN maps
applying
35-35
common uses for 35-35
configuration guidelines 35-31
configuring 35-31
creating 35-32
defined 35-2