Cisco Catalyst 3750-E - Page 145

5-9
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Chapter 5 Managing Switch Stacks
Understanding Switch Stacks
Ta b l e 5-1 Results of Comparing the Provisioned Configuration with the Provisioned Switch
Scenario Result
The stack member numbers and
t
he switch types match.
1. If the stack member number of the
provisioned switch matches the stack
member number in the provisioned
configuration on the stack, and
2. If the switch type of the provisioned switch
matches the switch type in the provisioned
configuration on the stack.
The switch stack applies the provisioned
co
nfiguration to the provisioned switch
and adds it to the stack.
The stack member numbers
m
atch but the switch types do
not match.
1. If the stack member number of the
provisioned switch matches the stack
member number in the provisioned
configuration on the stack, but
2. The switch type of the provisioned switch
does not match the switch type in the
provisioned configuration on the stack.
The switch stack applies the default
co
nfiguration to the provisioned switch
and adds it to the stack.
The provisioned configuration is changed
t
o reflect the new information.
The stack member number is
n
ot found in the provisioned
configuration.
The switch stack applies the default
configuration to the provisioned switch
and adds it to the stack.
The provisioned configuration is changed
t
o reflect the new information.
The stack member number of
th
e provisioned switch is in
conflict with an existing stack
member.
The stack master assigns a new stack member
n
umber to the provisioned switch.
The stack member numbers and the switch types
mat
ch:
1. If the new stack member number of the
provisioned switch matches the stack
member number in the provisioned
configuration on the stack, and
2. If the switch type of the provisioned switch
matches the switch type in the provisioned
configuration on the stack.
The switch stack applies the provisioned
co
nfiguration to the provisioned switch
and adds it to the stack.
The provisioned configuration is changed
t
o reflect the new information.
The stack member numbers match, but the
s
witch types do not match:
1. If the stack member number of the
provisioned switch matches the stack
member number in the provisioned
configuration on the stack, but
2. The switch type of the provisioned switch
does not match the switch type in the
provisioned configuration on the stack.
The switch stack applies the default
co
nfiguration to the provisioned switch
and adds it to the stack.
The provisioned configuration is changed
t
o reflect the new information.
The stack member number of
t
he provisioned switch is not
found in the provisioned
configuration.
The switch stack applies the default
co
nfiguration to the provisioned switch
and adds it to the stack.