Contents
viii
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-08
Configuring NTP Authentication 7-4
Configuring NTP Associations 7-5
Configuring NTP Broadcast Service 7-6
Configuring NTP Access Restrictions 7-8
Configuring the Source IP Address for NTP Packets 7-10
Displaying the NTP Configuration 7-11
Configuring Time and Date Manually 7-11
Setting the System Clock 7-11
Displaying the Time and Date Configuration 7-12
Configuring the Time Zone 7-12
Configuring Summer Time (Daylight Saving Time) 7-13
Configuring a System Name and Prompt 7-14
Default System Name and Prompt Configuration 7-15
Configuring a System Name 7-15
Understanding DNS 7-15
Default DNS Configuration 7-16
Setting Up DNS 7-16
Displaying the DNS Configuration 7-17
Creating a Banner 7-17
Default Banner Configuration 7-17
Configuring a Message-of-the-Day Login Banner 7-18
Configuring a Login Banner 7-19
Managing the MAC Address Table 7-19
Building the Address Table 7-20
MAC Addresses and VLANs 7-20
MAC Addresses and Switch Stacks 7-21
Default MAC Address Table Configuration 7-21
Changing the Address Aging Time 7-21
Removing Dynamic Address Entries 7-22
Configuring MAC Address Change Notification Traps 7-22
Configuring MAC Address Move Notification Traps 7-24
Configuring MAC Threshold Notification Traps 7-25
Adding and Removing Static Address Entries 7-27
Configuring Unicast MAC Address Filtering 7-28
Disabling MAC Address Learning on a VLAN 7-29
Displaying Address Table Entries 7-30
Managing the ARP Table 7-31
To Next Page
Loading...
