Get ting St ar t e d
Installing the NSS 322, NSS 324, and NSS 326
Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide 19
2
Installing the NSS 322, NSS 324, and NSS 326
Please place your NSS 322, NSS 324, or NSS 326 on a desktop or flat surface.
Placement Tips
•
Ambient Temperature
—To prevent the device from overheating, do not
operate it in an area that exceeds an ambient temperature of 104°F (40°C).
•
Air Flow
—Be sure that there is adequate air flow around the device. Avoid
any obstructions to air flow either in front of or behind the chassis.
•
Mechanical Loading
—Be sure that the device is level and stable to avoid
any haza rdous c ond itions . Do not place any other dev ic es on top of th e
NAS.
•
Vibration/Impacts
—Be sure that the device is installed in a location where
it will not be subject to vibration or impact because this can cause a
mechanical shock and premature drive failures.
Installing the Disk Drives
CAUTION
When storing unused disk drives, do not stack multiple disk drives because this can
cause drive failures.
When installing the disk drives, follow the suggestions in
Cisco Electrostatic
Disc har ge and Grounding B es t Prac tice s
, located on the product CD.
7 Ethernet Port (2) Dual Ethernet ports. The top LAN port is LAN1
and the b ottom LA N port is LAN 2.
8 Fan System fan(s).
NOTE:
The NSS 324 has one fan.
NSS 324 and NSS 326 Back Panel
Number Item Description
To Next Page
Loading...
Need help?
General
