Managing the System
Disk Management
Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide 112
3
STEP 3
Select an available drive and click
Migrate
.
STEP 4
Selec t one or more available drive s . The dr ive capa cit y after migration is
displayed. Click
Migrate
.
When migration is in proce s s , the required time and total drive capacit y after
migration are displayed in the “D es c ription” field. After migration completes , the
new drive configuration is displayed and the status is Ready. You can use the new
drive configuration.
To configure a spare drive:
STEP 1
Prepare a drive of the same format and same capacity (or larger) as an existing
drive in the R AID configur ation. The dr ive c onfigura tion status mu st be Read y.
STEP 2
Choose
Disk Management > RAID Management
from the Navigation menu. The
RAID Management
window opens.
STEP 3
Select a volume to have a spare drive added t o it and click
Configure Spare Drive
.
STEP 4
Selec t a drive to be added to the volume tha t you prev ious ly s elected and click
Configure Spare Drive
. When you add a spare drive, all the data on the selected
drive will be deleted during this process. Click
OK
to proceed.
After the configuration com pletes, the dr ive con figura tion is updated and the
status is Ready. You can use the drive configuration.
HDD SMAR T
The
Disk Mana g em ent > H DD S MA RT
windows enables users to monitor hard
drive health, temperature, and usage st atus by the hard disk S.M.A.R.T. mechanism.
To Next Page
Loading...
