Managing the System
Administration
Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide 82
3
TF TP C onfi guration
—TFTP configuration is used to enable a saved configuration
to be pushed out to the NAS. For instance, a reseller might create a custom
configuration to distribute to all of their clients. The cust om co nfigurati on is pushed
out to the NAS as soon as the NAS boots up and makes a DHCP requ est, such as
getting an IP address from the router.
•
Enab le Automatic C onfig uration D ownlo ad from TFT P Serv er
(Option 66/150 & 67)
—When enabled, the NAS will automatically retrieve
the system configuration from a Trivial File Transfer Protocol (TFTP) server
which is provided by the DHCP server when the NAS boots up.
-
Backup TFTP Server
—Enter the name of the backup TFTP server. If the
TFTP se rver p ro vi ded by the DHC P serve r can no t be accessed , t he NAS
will acquire the backup configuration file from the backup TFTP server.
-
Backup Configuratio n File
—Enter the name of the backup configurat ion
file from the backup TFTP server you entered in Backup TFTP Server.
NOTE
If the NAS is configured with a static IP address, the system will not
acquire the TFTP configuration from the DHCP server and will use the NAS
internal configuration file for system startup, even if Enable Automatic
Configuration Download from TFTP Server is enabled.
STEP 3
Click
Apply
to save the s et tings.
S y s t em Logs Se tt i n gs
This section describes the system logs and includes the following sections:
•
System Lo g S et t ing s
•
System Ev ent Lo gs
•
System C onne c tion L og s
•
On-Line Users
•
Syslog
To Next Page
Loading...
