Managing the System
Network Services
Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide 132
3
To enable Telnet/SSH remote login:
STEP 1
Choose
Network Services > Telnet/SSH
from the Navigation menu.
The
Telnet/S SH
window opens.
STEP 2
Click
Allow Telnet connection
to enable Telnet/SSH remote login.
STEP 3
Enter a Port Number for Telnet. The default port is 23.
STEP 4
Click
Allow SSH connection
to enable SSH connection.
STEP 5
Enter a Port Number for SSH connection. The default value is 22.
STEP 6
Click
Apply
. Your Telnet/SSH settings are updated to the NAS.
SNMP Settings
From the
Net work Ser vices > SNMP Settings
window, you can configure Simple
Network Management Protocol (SNMP), which is widely used in network
man a g e me n t s ystem s to mo n i tor ap p l iance s a tt a ch ed to a ne two r k su c h a s a NAS.
You can set up SNMP traps to be alerted via SNMP. You can enter up to three
SNMP trap addresses. In addi tion, you can also select the syst em event log level in
SNMP.
To Next Page
Loading...
Need help?
General
