Using the LCD Display
Viewing System Information Using the LCD Display
Cisco Small Business NSS 322, NSS 324, and NSS 326 Smart Storage Administration Guide 194
7
Reboot
Use the Reboot option to restart the NAS.
To reboot the NAS:
STEP 1
From the Main Men u, pres s the
Select
button until the Reboot option is displayed.
STEP 2
Pres s the
Select
button to selec t
Yes
.
STEP 3
Pres s the
Enter
button to confirm.
Password
The default password of the LCD display is blank. Enter the Password option to
change the password of the LCD display.
NOTE
The LCD password is not the same as the “admin” account password.
To change the password of the LCD display:
STEP 1
From the Main Men u, pres s the
Select
button until the Password option is
displayed. The following is sh own:
STEP 2
Select
Yes
to continue.
STEP 3
Enter a passw ord with a maxim um of eight numeric cha ra cters (0 -9).
STEP 4
When the cursor moves to OK, press the
Enter
button. To confirm the changes,
verify the password.
C h a n g e P a s s w o r d
Y e s N o
N e w P a s s w o r d :
O K
To Next Page
Loading...
Need help?
General
