ONS 15454 M6ONS 15454 M2ONS 15454Cisco Supplied
Material
—ANSI
Double-hole power lug for DC
power connection with a wire
receptacle to accommodate the
recommended 8.4 mm² (#8 AWG)
multistrand copper wire (1)
—Power Lug
ANSI
#12-24 x 0.50 pan-head Phillips
screws (8)
ETSI
M6.0 x 20 pan-head Phillips
screws (8)
ANSI
#12-24 x 0.50 pan-head Phillips
screws (8)
ETSI
M6.0 x 20 pan-head Phillips screws
(8)
ANSI
• #12-24 x 3/4 pan-head Phillips
mounting screws (48-1004-XX,
48-1007-XX) (8)
• #12 -24 x 3/4 socket set screws
(48-1003-XX) (2)
ETSI
• M4 x 8 mm pan-head Phillips screws
(2)
• M6 x 20 mm pan-head Phillips
screws (8)
Screws
——ANSI
Spacers (50-1193-XX)(4)
Spacers
——ANSI
Standoff kit (53-0795-XX):
Plastic fiber management guides (2)Fan
filter bracket screws (53-48-0003) (6)
Standoff Kit
Tie wraps (10)Tie wraps (10)ANSI
Tie Wraps (10)
ETSI
Tie wraps 0.125-inch (3.2 mm) W x
6.0-inch (152 mm) L (24)
Tie Wraps
Only use the power cables that are designed to be used with the ONS 15454 (ANSI or ETSI), the ONS 15454
M2 or ONS 15454 M6. These are sold separately.
Caution
User Supplied Materials
The following materials, tools, and equipment are required but are not supplied with the ONS 15454 (ANSI
and ETSI), ONS 15454 M2 and ONS 15454 M6.
Cisco ONS 15454 Hardware Installation Guide
11
Preparing to Install the ONS 15454 (ANSI and ETSI), ONS 15454 M2 and ONS 15454 M6 Shelf
User Supplied Materials
To Next Page
Loading...
