NTP-G5 Remove the Backplane Covers (ANSI Only) 63
DLP-G13 Remove the Lower Backplane Cover 64
DLP-G14 Remove the Backplane Sheet Metal Cover 65
ONS 15454 ETSI Front Mount Electrical Connection 65
NTP-G6 Install the MIC-A/P and MIC-T/C/P FMECs (ETSI Only) 66
Power and Ground Description 67
NTP-G7 Install the Power and Ground 68
DLP-G17 Connect Office Power to the ONS 15454 ETSI 70
DLP-G18 Connect Office Power to the ONS 15454 ANSI 71
DLP-G19 Turn On and Verify Office Power 74
Shelf Voltage and Temperature 75
NTP-G230 View Shelf Voltage and Temperature 76
Fan-Tray Assembly 76
Fan-tray Units for ONS 15454 Cards 78
Fan Speed 81
Fan Failure 81
Air Filter 82
NTP-G8 Install the Fan-Tray Assembly 82
ONS 15454 ANSI Alarm Expansion Panel 85
NTP-G9 Install the Alarm Expansion Panel (ANSI Only) 91
ONS 15454 ANSI Alarm, Timing, LAN, and Craft Pin Connections 94
Alarm Contact Connections 97
Timing Connections 98
LAN Connections 98
TL1 Craft Interface Installation 99
NTP-G10 Attach Wires to Alarm, Timing, LAN, and Craft Pin Connections 100
DLP-G20 Install Alarm Wires on the MIC-A/P (ETSI Only) 101
DLP-G21 Install Timing Wires on the MIC-C/T/P (ETSI Only) 104
DLP-G22 Install LAN Wires on the MIC-C/T/P (ETSI Only) 105
DLP-G23 Install Alarm Wires on the Backplane (ANSI Only) 106
DLP-G24 Install Timing Wires on the Backplane (ANSI Only) 109
DLP-G25 Install LAN Wires on the Backplane (ANSI Only) 110
DLP-G26 Install the TL1 Craft Interface Wires (ANSI Only) 111
NTP-G11 Install an External Wire-Wrap Panel on the AEP (ANSI Only) 112
Cisco ONS 15454 Hardware Installation Guide
v
Contents
To Next Page
Loading...
