COBHAM SAILOR 100 GX User Manual

SNMP support
6-46 Chapter 6: Configuration 99-145912-A
6.5 SNMP support
The SAILOR 100 GX supports SNMP v2 requests to retrieve
configuration and present settings. SNMP is always enabled on all
Ethernet interfaces. The SNMP community string is public.
The SAILOR 100 GX offers via SNMP most of the data that are available
from the DASHBOARD web pages. Detailed documentation about
supported OIDs can be found in the SAILOR 100 GX MIB file.
The MIB entries are grouped in the following sections:
• System configuration
• Navigation coordinates
• Antenna pointing
• Dashboard and profile
• Tracking receiver
You can get the MIB file in two ways:
1. Download the ACU MIB file directly from the ACU from the
HELPDESK page.
Click the link Download MIB file and save the file on your
computer.
2. Download the ACU MIB from Cobham eSupport web site.
Note
None of the SNMP values need to be polled more often than
once a minute. Polling SNMP values more frequently will
impact the performance of the ACU.
Figure 6-33: Download of MIB file

COBHAM SAILOR 100 GX Specifications

General

Brand	COBHAM
Model	SAILOR 100 GX
Category	Marine Equipment
Language	English