Configuration with the web interface
6-32 Chapter 6: Configuration 99-145912-A
6.3.7 Upload
For uploading new software to the SAILOR 100 GX see Software
update on page 8-5.
6.3.8 Administration
In this section of the web interface you can configure the following
administrative settings:
• To access the administration settings (user name, password)
• To set up user permissions (guest login)
• To import and export a system configuration
• To reset to factory default - ADU and ACU
You can log on as an administrator or as guest (user name: guest,
password: guest). You can allow or deny users that are not
administrators (user name: guest, password: guest) access to certain
functions and make these pages read-only, see more in To set up user
permissions (guest login) on page 6-34.
To access the administration settings (user name, password)
The Administration settings require an Administration user name and
password. To log on as administrator, do as follows:
1. Select ADMINISTRATION from the left navigation pane.
2. Enter the Administration user name and password.
The default user name is admin and the default password is 1234.
3. Click Logon.
The Administration page is now updated to let you change the user
name and password or log off Administration.
If you have forgotten the administrator password, you can reset the
password, see the next section.
To change the administrator password
Figure 6-23: Web interface: Administration
To Next Page
Loading...
Need help?
General
