USING THE WIZARD
USING THE WIZARD
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 25
1 If you are adding:
• a Selective, Channel Test, Emergency, Get Position or
Send Position call, continue from Adding a simple call on
page 25
• a Message call, continue from Adding a Message call on
page 26
• a Phone call, continue from Adding a Phone call on
page 28
Related links:
Contacts on page 117
Adding a simple call
A simple call is a call that requires an address only at this stage of the
definition process.
To continue with adding a Selective, Channel Test, Emergency, Get
Position or Send Position call:
1 Press to move to the Selcall|ALE Address entry.
1 Enter the address of the station that you want to call.
1 Continue from Completing the contact on page 28.
To Next Page
Loading...
Need help?
General
