• Use the left-hand arrow keys to highlight one of the trim
weights you want to remove then press Remove or
Keep. The calculator will re-calculate the suggested
weight/angle accordingly. You can experiment with different
remove/keep combinations by repeating this process (to add
a subtracted weight back to the calculator press again).
• When you are satisfied with the suggested weight calculation
press to continue. To exit the menu without combining
any trim weights, replace any removed weights before
continuing.
Reviewing Previous Balancing Jobs
• From the Main Menu press Balance then Select
Machine.
• Use the left-hand arrow keys to highlight a machine. All
balancing jobs associated with that machine will display in
the right-hand Recordings column.
• Press the right-hand arrow key select the Recordings
column; a black border will appear around it indicating that
you can now browse through the recordings.
To Next Page
Loading...
Need help?
General
