Section 7: Setting Measurement
Options
This section describes the different parameters used to take
measurements and how to apply them.
You will learn:
• What the various parameters are for spectra, waveforms and
other measurement types
• How to create parameter sets for taking measurements
• What measurement units and overall scaling options are
available
• How to assign sensors to channels
Setting Measurement Units and
Spectrum Scaling
You can choose the standard US or SI units, or choose your own
preferences. The table below summarizes the options.
• To set a preference, from the Main Menu press
Options then press Measuring Units.
• Press repeatedly to toggle which unit set is displayed.
To set your own preferences select Custom then press the
keys beside the first option you wish to change.
• Most on-screen options will open a sub-menu; press the
keys repeatedly to cycle through the various options. When
you have finished press to save and return to the
Measurement Units Menu.
To Next Page
Loading...