EasyManuals Logo

Commtest Instruments vbBalancer User Manual

Default Icon
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Section 9: Taking Recordings
91
To record every parameter set under a location, highlight the
location and press to begin recording.
Saving Recordings
When you are in the Record Review Menu you have several options
for saving your recordings.
Auto Save
The instrument momentarily displays the recorded information
on-screen before returning you to the Record Review Menu.
Record/Review
The instrument pauses after each recording so that you can review it
on-screen.
To take the next recording press This will either return
you to the Record Review Menu or, if you have selected a
location with multiple parameter sets underneath it, begin
taking the next recording.
Free Run, Manual Save
The instrument will continuously record the signal and update the
on-screen display.
To stop measuring press To save the recording press
To record the next parameter set without saving this
recording press This will either return you to the Record
Review Menu or, if you have selected a location with multiple
parameter sets underneath it, begin taking the next
recording.
Reviewing Recordings
To review recordings immediately after taking them you can set the
instrument's save option to Record/Review; to do this, from the Main
Menu press
Review Vibration then press repeatedly until

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Commtest Instruments vbBalancer and is the answer not in the manual?

Commtest Instruments vbBalancer Specifications

General IconGeneral
BrandCommtest Instruments
ModelvbBalancer
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals