INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 124
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
Frame Rate Selecting the frame rate of AIS PDU. This is the inverse of transmission period as described in
Y.1731.
Protection Selecting this means that the first 3 AIS PDU is transmitted as fast as possible - in case of using this
for protection in the end point.
LOCK
Enable Insertion of LOCK signal (LCK PDU transmission) in client layer flows, can be enable/disabled.
Frame Rate Selecting the frame rate of LCK PDU. This is the inverse of transmission period as described in
Y.1731.:
Refresh Click to refresh the page immediately.
Back Click to go back to this MEP instance main page.
Apply Click to apply changes.
Reset Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
