INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 67
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Rate Limiters
Configure the rate limiter for the ACL of the switch.
Object Description
Rate Limiter ID The rate limiter ID for the settings contained in the same row.
Rate The rate range is located 0-3276700 in pps.
Or 0, 100, 200, 300, ..., 1000000 in kbps.
Unit Specify the rate unit. The allowed values are: pps: packets per second. kbps: Kbits per second.
Apply Click to apply changes.
Reset Click to revert to previous values.