139
TECHNICAL
SPECIFICATIONS
G
Portable and mobile RF
communications equipment
should be no closer to any part of
the Hall Advantage, E9000, and
PowerPro Systems, including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended Separation
Distance
Conducted RF 3 Vrms 3 Vrms d = 1.2 √ P
IEC 61000-4-6 150 kHz to 80 MHz 150 kHz to 80 MHz
Radiated RF 3 V/m 3 V/m d = 1.2 √ P 80 MHz to 800 MHz
IEC 61000-4-3 80 MHz to 2.5 GHz d = 2.3 √ P 800 MHz to 2.5 GHz
where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in meters (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey
a
,
should be less than the
compliance level in each
frequency range
b
.
The Hall Advantage, E9000, and PowerPro Systems are intended for use in the electromagnetic environment
specified below. The customer or the user of these Hall Advantage, E9000, and PowerPro Systems should assure
that they are used in such an environment.
Immunity Test
IEC 60601
Test Level
Compliance Level
Electromagnetic environment
guidance
To Next Page
Loading...
