ConMed Advantage - Page 152

144
TECHNICAL
SPECIFICATIONS
G
MicroChoice Modular Handpiece (5020-027)
MicroChoice Elite High Speed Drill (5020-025)
MicroChoice Medium Speed Drill (5020-021)
Speed Settings: 10 to 100% (1,000 rpm) in 10% increments
Cannulated: Maximum 0.125 in. (3.2 mm) diameter
Width: 4.10 in. (10.4 cm)
Height: 5.61 in. (14.2 cm)
Weight: 23 oz. (644 g)
Material: Anodized Aluminum and Stainless Steel
Torque: 10 in. lbs.
Speed Settings: 10,000 to 100,000 rpm (nominal) in 10,000 rpm increments
Default Speed: 70,000 rpm
Torque: 2 in. oz.
Bur Pull Out Force: Exceeds 12.0 lbs. (5.4 kg)
Length: 5.85 in. (14.9 cm)
Diameter: 0.75 in. (1.9 cm)
Weight: 7 oz. (196 g)
Material: Stainless Steel
Speed Settings: 1,000 to 25,000 rpm (nominal) in 2,000 rpm increments
Default Speed: 25,000 rpm
Torque: 6 in. oz
Bur Pull Out Force: Exceeds 12.0 lbs. (5.4 kg)
Length: 4.86 in. (12.3 cm)
Diameter: 0.70 in. (1.8 cm)
Weight: 7 oz. (196 g)
Material: Stainless Steel