145
TECHNICAL
SPECIFICATIONS
G
MicroChoice Low Speed Drill (5020-026)
MicroChoice Sagittal Saw (5020-022)
MicroChoice Reciprocating Saw (5020-023)
Drill Head (single color band)
Speed Settings: 250 to 2,500 rpm (nominal) in 250 rpm increments
Default Speed: 2,500 rpm (nominal)
Torque: 15 in. oz.
Length: 5.85 in. (14.9 cm)
Diameter: 0.75 in. (1.9 cm)
Weight: 4.5 oz. (126 g)
Material: Stainless Steel
Screw/Tap Head (two color bands)
Speed Settings: 4 to 30 rpm (nominal) in 2 rpm increments
Default Speed: 30 rpm (nominal)
Torque: 25 in. oz. (screw)
55 in. oz. (tap forward)
60 in. oz. (tap reverse)
Speed Settings: 20 - 100% (20,000 cpm) in 10% increments
Stroke: 4° arc
Length: 6.64 in. (16.9 cm)
Diameter: 1.0 in. (2.54 cm)
Weight: 6.9 oz. (195 g)
Material: Stainless Steel
Speed Settings: 20 - 100% (17,000 cpm) in 10% increments
Stroke: 1/10 in. (2.54 mm)
Length: 8.17 in. (20.8 cm)
Diameter: 0.75 in. (1.9 cm)
Weight: 8 oz. (208 g)
Material: Stainless Steel
To Next Page
Loading...
