30
1.8.3.4 Tubing Set (E9418) for use with Group 2 MicroChoice Drills and Saws
The E9418 Tubing Set is used to provide irrigation for blades, bits and burs while using any of the
MicroChoice Group 2 Drills or Saws (excludes the MicroChoice Modular Handpiece, 5020-027).
1. Spike Line — Connects to the fluid supply for fluid distribution to the surgical site.
2. Cassette — Attaches to the peristaltic pump of the controller to aid in fluid delivery.
3. Roller Clamp — Used to adjust the fluid flow to the surgical site.
4. Handpiece Cord Clips — Used to attach the tubing to the handpiece cord.
5. Irrigator Tip — Accepts various irrigation tips (See “6.1 Handpieces, Attachments and
Accessories” on page 149) for the Group 2 MicroChoice drills and saws for fluid distribution to
the surgical site.
To Next Page
Loading...
