ConMed Advantage - 2.1.2.3 Connecting all Group 1 and Group 2 Handpieces

CONTROLLER
OPERATION
34
A
(b) Then, insert the male end of the adapter
into the E9000 or Power
Pro Controller
handpiece receptacle.
2.1.2.3 Connecting all Group 1 and
Group 2 Handpieces
NOTE: Group 1 and Group 2 handpieces
consist of all E9000 and MicroChoice
handpieces
1. If using the Advantage controller:
(a) Plug the handpiece cord
connector directly into the
Port 2 receptacle on the
top part of the controller.
1. If using the E9000 or Power
Pro controller:
(a) Plug the handpiece cord connector
directly into the handpiece receptacle.
E9000 Controller
PowerPro Controller
E9000 Controller
PowerPro Controller