Handpiece Speed Adjustment Only
(Does not apply to any APEX Shaver Handpiece)
To enter the menu options and adjust only the handpiece speed, press the handpiece cord button
two or three times.
Text Display Mode Graphics Display Mode
“IRRIGATION” “SPEED”
“IRRIGATION” is blinking
Press the handpiece cord button until
“SPEED” is blinking.
The menu will default to the speed menu and
display the attached handpiece and the
current speed setting.
“HIGH SPEED” “###K RPM”
“###” is blinking
Press the handpiece cord button until the
desired speed is displayed. Stop pressing the
button.
To Next Page
Loading...
