To enter the menu options and adjust both the irrigation flow rate and handpiece speed, press the
handpiece cord button two or three times.
“IRRIGATION” “SPEED”
“IRRIGATION” is blinking
No action taken
“IRRIGATION” “###%”
“###” is blinking
Press the handpiece cord button until the
desired flow rate is displayed. Stop pressing
the button. After a few seconds, the menu
will default to the speed menu, displaying
the attached handpiece and the current speed
setting.
“HIGH SPEED” “###K RPM”
“###” is blinking
Press the handpiece cord button until the
desired speed is displayed. Stop pressing the
button.
Text Display Mode Graphics Display Mode
Irrigation Flow Rate and Handpiece Speed Adjustment
(Does not apply to any APEX Shaver Handpiece)
To Next Page
Loading...
