SETUP Placement
Cubiscan 325 7
Lift the Cubiscan 325 out of the shipping crate. It is best to have two
people do this because the Cubiscan 325 weighs about 173 lbs (78.5 kg)
and may be awkward to handle.
Placement
The Cubiscan 325 is designed to be operated in a warehouse environment;
however, for proper operation the following conditions should be met if
possible.
• Do not subject the Cubiscan 325 to extremes in temperature or
humidity. Locate the Cubiscan 325 as far from open freight doors as
possible. Heaters or air conditioners should not blow directly on the
Cubiscan 325.
• Avoid placing the Cubiscan 325 in direct sunlight, as it may affect
measurement readings.
• Protect the Cubiscan 325 from static electricity, especially the
touchscreen.
• Place the Cubiscan 325 on a flat, sturdy surface as free from vibration as
possible. Excess vibration can reduce the accuracy of the Cubiscan 325
scale.
• The Cubiscan 325's platform is free-floating—it is resting on four springs
(load cells). Maintain a minimum of one-inch clearance at the back and
sides of the Cubiscan 325. Do not rest objects against or set objects on
the Cubiscan 325 when not in use.
• If a computer is used, place it as close to the Cubiscan 325 as possible.
The operator needs to use the keyboard or mouse on the computer
while cubing and weighing packages using the Cubiscan 325.
• Orient the Cubiscan 325 so the touchscreen faces the operator.
Assembling the Cubiscan 325
The Cubiscan 325 is almost completely assembled when shipped.
To Next Page
Loading...