CubiScan 325 - Ethernet

CONFIGURATION System configuration
Cubiscan 325 46
Units
In this field you can select the units that will be used. The options are
inches (in), centimeters (cm), millimeters (mm), pounds (lb), or kilograms
(kg).
Scale Increment
In this drop-down box you can select the accuracy of the scale in pounds or
kilograms. The options for pounds are 0.005, 0.01, or 0.02. The options for
kilograms are 0.002, 0.005, or 0.01.
Dim-Factor
In this field you can select the dim factor that will be used. The options are
domestic and international.
Machine ID
In this field you can enter a unique ID for your Cubiscan. This can be helpful
if you have more than one Cubiscan on site.
Factors
In these fields you can view or change the current dim factor values.
The following table displays the default dimensional weight factors used by
the Cubiscan.
Ethernet
This section discusses the options available on the Ethernet menu.
Complete the following steps to access the Ethernet menu.
139 International: inches, pounds (in lb)
166 Domestic: inches, pounds (in lb)
306 International: inches, kilograms (in kg)
366 Domestic: inches, kilograms (in kg)
2278 International: centimeters, pounds (cm lb)
2720 Domestic: centimeters, pounds (cm lb)
5000 International: centimeters, kilograms (cm kg)
6000 Domestic: centimeters, kilograms (cm kg)