OPERATION Cubing and weighing
Cubiscan 325 28
Touchscreen care
Never use a sharp or hard-tipped object to tap on the touchscreen. It is
glass and can scratch or break. You can tap lightly on the screen with your
fingertip, or you can use the eraser end of a pencil or a stylus with a soft
point. Use a light touch, just hard enough for the screen to respond.
To clean the touchscreen, moisten a soft cloth with water, then gently wipe
the screen clean with the cloth. Do not spray liquid directly on the
touchscreen.
Cubing and weighing
The Cubiscan 325 can be used to measure irregularly-shaped, opaque
objects as small as 0.1 inch (refer to “Specifications” on page 2 for
specifications and size limitations).
Objects are measured by the infrared light beams on the Cubiscan 325’s
gate by moving the gate over the object on the platform.
Refer to the appropriate following section for instructions.
Cubing and weighing using Qbit
Refer to the Qbit User Guide for instructions on measuring, weighing, and
other functions in Qbit. The Qbit User Guide is provided on the flash drive
or you can download it from the Cubiscan website at www.cubiscan.com
.
Cubing and weighing using Web Services
Refer to the API Documentation Guide for instructions on interfacing to the
Cubiscan via Web Services.
Cubing and weighing using other interfaces
Refer to the Communications Protocol for information to set up cubing and
weighing through other interfaces.
To Next Page
Loading...