Cubiscan 325 operations and technical manual
Cubiscan
®
and the Quantronix logo are registered trademarks of Quantronix, Inc.
Scanning New Dimensions™, Qbit™, QbitWIN™, and The FreightWeigh System™ are trademarks of Quantronix, Inc.
Windows
®
is a registered trademark of Microsoft Corporation.
Cubiscan
®
software and firmware are protected by international and domestic copyrights.
Cubiscan
®
150 measurement products are protected by one or more of U.S. Patents Re42,430 and D490,328 and foreign patents.
Cubiscan
®
110 measurement products are protected by one or more of U.S. Patent Re42,430 and foreign patents.
Cubiscan
®
125 measurement products are the subject of U.S. Patent 8,928,896. Another U.S. patent is pending.
Cubiscan
®
225 measurement products are protected by one or more U.S. patents, refer to U.S. Patent 9435637.
This document and website Copyright
©
2018 by Quantronix, Inc. All rights reserved.
The Cubiscan 325 should only be serviced by qualified personnel.
Observe precautions for handling electrostatic sensitive devices when setting
up or operating the Cubiscan 325.
Disconnect all power to the Cubiscan 325 before servicing or making any
connections.
E171537
ITE
CAUTION
WARNING
To Next Page
Loading...