SETUP Setup checklist
Cubiscan 325 26
7. If you are using Qbit to operate the Cubiscan 325, has the
software been copied onto your computer's hard-disk drive? (Refer
to the Qbit User Guide for information.)
8. Does the Cubiscan 325 require recalibration? The Cubiscan 325
was calibrated at the factory, but may require recalibration due to
handling during shipping. Refer to page 51 for information on
calibrating the Cubiscan 325. If you are using Qbit software, check
the status of the Cubiscan 325 before operating it. Refer to the Qbit
User Guide for information on checking the Cubiscan 325’s
status.important events in history time line
To Next Page
Loading...