6 Culligan® Smart Controller (GBE) for Softeners and Filters
6 Cat. No. 01021161
Installation
Electrical Installation
CAUTION! Observe the precautions listed below before electrical installation of your Smart
Controller (GBE). Failure to do so may cause permanent damage to the controller.
• Follow the local electrical code requirements.
• Be sure electrical power is off and disconnected at the source before completing any wiring/cabling connections.
• Provide a dedicated 120 Volt circuit for the Smart Controller system to ensure maximum electrical protection.
• DO NOT include the Smart Controller wiring cables in any conduit or raceway containing other 120 Volt or higher
circuits.
• Maintain a distance of at least 10 feet between the Smart Controller and any electrical distribution panels, race-
ways carrying 300 Volts or more, and electrical motors of 1 horsepower or more.
• Use the cabling provided. Failure to do so may effect performance of the Smart Controller adversely.
WARNING! One transformer is required for each controller in the system. Do not attempt to operate
multiple controllers without a dedicated transformer for each or your system will experi-
ence operational difficulties.
To Next Page
Loading...
Need help?
General
