Installing Accessories 65
Cat. No. 01021161
Service Phone Number
If the Modem is not installed it is possible, in addition to displaying the error message, to display a message that reads
“Call Culligan at: XXXXXXXXXX” where the telephone number XXXXXXXXXX can be programmed by the dealership
(typically programmed to be the telephone number of the dealership).
1. From the HOME screen, press to view the main menu.
2. The screen displays the main menu. Press to select
4)ACCESSORIES.
3. From the Accessories menu, press to select
10)SERVICE PHON.
4. Press to change the Service Phone Number setting. Press or and
then
to increase or decrease each digit of the service phone number and move
to the next digit. Press
when the correct 14-digit Service phone # is displayed.
5. Press to save the settings and return to the home screen.
External Filter
The unit can provide alarm feedback for a sediment or carbon filter installed upstream of the unit. The Auxiliary flow alarm
can be used to monitor the flow through this filter.
To use this feature it is necessary to specify either the total lifetime totalized flow of the auxiliary filter in either gallons or
liters or the total life in days at Main Menu/Accessories/Ext. Filter. Once set, it will begin to track the total gallons through
the system flow meter or days in operation. Once the total flow reaches the specified lifetime totalized flow or the set num-
ber of days, the system will display the error message “Change Auxiliary Filter” on the main display as well as the remote
display and via the telephone modem if these secondary devices are used.
1. From the HOME screen, press to view the main menu.
2. The screen displays the main menu. Press to select
4)ACCESSORIES.
To Next Page
Loading...
Need help?
General
