68 Culligan® Smart Controller (GBE) for Softeners and Filters
68 Cat. No. 01021161
Menu Lockout
It is possible to lock the keypad of the Smart Controller so that users will only have access to the INFORMATION, MANU-
AL MODE, and SET DATE/TIME menu screens.
The system can be locked from the home screen. Press and simultaneously
and holding them down for 10 seconds until you see the word LOCKED.
Repeating this process will unlock the keypad.
NOTE Menu lockout may only be completed from the home screen.
Menu Default—Rerun First Time Setup
Below is the procedure to default the board to factory settings and begin the first time setup.
1. Power down the control.
2. Power up the control while pressing
and for at least ten (10) seconds.
3. Release
and . The display should be blank—if not go back to step 1.
4. After a brief 10-20 second delay, the screen lights up for two seconds and then displays FIRST TIME SETUP.
5. Follow the first time setup process.
To Next Page
Loading...