22 Culligan® Smart Controller (GBE) for Softeners and Filters
22 Cat. No. 01021161
Customizing Set Up
The Smart Controller is designed to simplify the setup and installation process by making some default recommendations
during the Initial Setup. The default settings are designed to be appropriate for most common installations.
Default Settings
• Downflow Brining
2
• Time of Regen = 2:00 AM
2
• Regen Time = Delayed
2
• Predict Mode OFF
3
• 30% Reserve Capacity
2
• Time Clock Backup = OFF
3
• Day-of-week Regen = OFF
3
• Pre-Rinse Mode = OFF
1
1
These items are changed on the Main Menu / Advanced / System Setup Menu.
2
These items are changed on the Main Menu / Advanced / Regen Setup Menu.
3
These items are changed on the Main Menu / Advanced / Regen Trigger Menu.
Depending on the configuration of the system and/or user preferences, you may have to override the default regenera-
tion selections. See Advanced Setup Menu, Regeneration Setup Menu or Regeneration Trigger Menu for information on
changing default selections.
Advanced Setup
System Setup
Default values are shown for each selection.
1. From the HOME screen, press to view the main menu.
2. The screen displays the main menu. Press to select 5)ADV.
SETUP.
3. The screen displays the advanced setup menu. The menu includes SYSTEM SET-
UP, REGEN SETUP, CYCLE TIMES, and REGENTRIGGER.
4. Press
to select 1)SYSTEM SETUP.
5. The screen displays the valve type setting specified during the first-time setup.
This setting cannot be changed. Press
to view the next setting.
To Next Page
Loading...
Need help?
General
