Curtiss-Wright R-NET OMNI2 - Mode Name; Input; Intermediate; Output

Curtiss-Wright | PG Drives Technology
SK81935-01
100 | R-net Omni2 Technical Manual | Chapter 5 – Infrared Control
8.2 MODE NAME
This is a 20 character text string that sets the name of the selected Mode. The sample screen above shows it as still being
named Mode 5, but it could be changed to something more specific, such as IR Control.
8.3 INPUT
This parameter should be set to Raw.
8.4 INTERMEDIATE
This parameter should be set to None.
8.5 OUTPUT
This parameter should be set to IR Control.
NOTE (HP, IN)
The OEM may have factory preset set these options.