Curtiss-Wright R-NET OMNI2 - 3 IR Set-Up

Curtiss-Wright | PG Drives Technology
R-net Omni2 Technical Manual | Chapter 5 – Infrared Control | 83
SK81935-01
3 IR SET-UP
3.1 ACCESSING THE IR SET-UP MENU
There are three methods of accessing IR Set-Up on the Omni2, via the Settings Menu.
Pressing the top right-hand soft-key on the Display Section, after the Omni2 has been switched on, will display the Settings
Menu screen. The Up/Down navigation keys on the front of the Display Section scroll up and down the menu. The Left/Right
keys select the highlighted option.
It is also possible to access the Settings Menu and therefore the IR Set-Up Menu, via the User Menu and OBP.
3.2 IR SET-UP MENU
On entering the IR Set-Up menu, the default Appliances will appear. By selecting an Appliance, then its Commands will be
shown.