Curtiss-Wright R-NET OMNI2 - Operation Initiation; The Application Window

To Next Page

To Previous Page

Curtiss-Wright | PG Drives Technology

SK81935-01

90 | R-net Omni2 Technical Manual | Chapter 5 – Infrared Control

7.1 OPERATION INITIATION

Upon opening the Configuration Tool, the following window will appear.

Select ‘Default’ from the drop-down menu.

To begin using the IR Configurator one of three things must occur:

 A new file must be opened.

 An existing file must be opened.

 A file must be read from the Control System.

7.2 THE APPLICATION WINDOW

For ease of description, the IR Configurator application will be separated into 4 different sections. These are:

 Drop-Down Menus

 Toolbars

 User Menu

 Libraries