Curtiss-Wright R-NET OMNI2 User Manual

Curtiss-Wright | PG Drives Technology
R-net Omni2 Technical Manual | Chapter 3 – Programming | 73
SK81935-01
2.12 TRAINING MODE
2.12.1 FORWARD INHIBIT
This allows the forward directional command of the SID to be inhibited.
The programmable options are On and Off.
If set to On, forward drive will be inhibited.
If set to Off, forward drive will not be inhibited.
2.12.2 REVERSE INHIBIT
This allows the reverse directional command of the SID to be inhibited.
The programmable options are On and Off.
If set to On, reverse drive will be inhibited.
If set to Off, reverse drive will not be inhibited.
2.12.3 RIGHT INHIBIT
This allows the right directional command of the SID to be inhibited.
The programmable options are On and Off.
If set to On, right drive will be inhibited.
If set to Off, right drive will not be inhibited.
2.12.4 LEFT INHIBIT
This allows the left directional command of the SID to be inhibited.
The programmable options are On and Off.
If set to On, left drive will be inhibited.
If set to Off, left drive will not be inhibited.

Curtiss-Wright R-NET OMNI2 Specifications

General

Brand	Curtiss-Wright
Model	R-NET OMNI2
Category	Recording Equipment
Language	English