Curtiss-Wright R-NET OMNI2 User Manual

Curtiss-Wright | PG Drives Technology
R-net Omni2 Technical Manual | Chapter 5 – Infrared Control | 95
SK81935-01
7.5.10 ASSIGN FROM LIBRARY
Assigns an IR Code from a highlighted Command in the Default Library or My Library to a highlighted Command in the User
Menu.
7.5.11 INSERT FROM LIBRARY
Inserts a highlighted Appliance or Command from the Default Library or My Library to the position beneath the highlighted
Appliance or Command in the User Menu.
The resultant text in the User Menu will be as per the Library, but can be changed by using the Rename utility.
NOTE (HP, IN)
The Library is ‘layered’ as Brand > Product Type > Appliance > Command. It is only possible to insert from the Appliance
level down.
7.6 LIBRARIES
The Libraries area displays all the IR Codes available to the programmer, on the PC that is being used.
For programmers wishing to build a library of Codes not found in the Default Library but often used in their region, the IR Tool
has been designed with a separate depository called My Library.
It is possible to switch between libraries at any time, and use the Codes within, to build efficient User Menus.
NOTE (HP, IN)
The Library is ‘layered’ as Brand > Product Type > Appliance > Command. It is only possible to insert from the Appliance
level down.

Curtiss-Wright R-NET OMNI2 Specifications

General

Brand	Curtiss-Wright
Model	R-NET OMNI2
Category	Recording Equipment
Language	English