Curtiss-Wright R-NET OMNI2 User Manual

Curtiss-Wright | PG Drives Technology
SK81935-01
158 | R-net Omni2 Technical Manual | Chapter 10 – Warnings Summary
2.32 SWITCH CONTROL SET-UP
NOTE (HP, IN)
Within Accessibility there are Auto Scanning and Auto Hide options. It is recommended that these options are turned off for
the initial set up.
The Library is ‘layered’ as Brand > Product Type > Appliance > Command. It is only possible to insert from the Appliance level
down.
2.33 FORWARD, REVERSE, LEFT, RIGHT, EXTERNAL SWITCH 1 & EXTERNAL SWITCH 2 SHORT
NOTE (HP, IN)
When keyboard is visible, Back command toggles between split keyboard and normal keyboard.
2.34 FORWARD, REVERSE, LEFT, RIGHT, EXTERNAL SWITCH 1 & EXTERNAL SWITCH 2 MEDIUM
NOTE (HP, IN)
When keyboard is visible, Back command toggles between split keyboard and normal keyboard.
2.35 FORWARD, REVERSE, LEFT, RIGHT, EXTERNAL SWITCH 1 & EXTERNAL SWITCH 2 LONG
NOTE (HP, IN)
When keyboard is visible, Back command toggles between split keyboard and normal keyboard.
2.36 MEDIUM NUDGE TIME
NOTE (HP, IN)
Medium Nudge Time must be programmed to a value greater than Short Nudge Time.
2.37 LONG NUDGE TIME
NOTE (HP, IN)
Long Nudge Time must be programmed to a value greater than Medium Nudge Time.
2.38 WIRELESS SECURITY MEASURES
NOTE (HP, IN)
Bluetooth® transfers are not encrypted. This should not pose a security risk if the product is used for the intended purpose.

Curtiss-Wright R-NET OMNI2 Specifications

General

Brand	Curtiss-Wright
Model	R-NET OMNI2
Category	Recording Equipment
Language	English