EasyManua.ls Logo

Curtiss-Wright R-NET OMNI2 - Introduction; Global - External On;Off Switch Detect; User Switch; Switch Detect

Curtiss-Wright R-NET OMNI2
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Curtiss-Wright | PG Drives Technology
SK81935-01
162 | R-net Omni2 Technical Manual | Chapter 10 Warnings Summary
4.13 INTRODUCTION
WARNING (HP, IN)
Programming should only be conducted by healthcare professionals with in-depth knowledge of PG Drives Technology
control systems. Incorrect programming could result in an unsafe set-up of a powerchair for a user. Curtiss-Wright accept no
liability for losses of any kind if the programming is inappropriate for the SID type or user.
4.14 GLOBAL EXTERNAL ON/OFF SWITCH DETECT
WARNING (HP, IN)
For a truly fail-safe system, Curtiss-Wright recommend that an On/Off Switch incorporating a resistor network is fitted.
Curtiss-Wright accept no liability for losses of any kind arising from the use of any other switch.
4.15 USER SWITCH
WARNING (HP, IN)
For a truly fail-safe system, Curtiss-Wright recommend that a User Switch incorporating a resistor network is fitted. Refer to
User Switch Detect for further details. If one of these is unavailable, a normally-closed User Switch should be used. This
ensures that if the switch becomes accidentally disconnected, the powerchair will default to a stop condition. If a normally-
open switch is used, the responsibility for that decision lies with the healthcare professional. Curtiss-Wright accept no
liability for any losses resulting from the use of a normally-open User Switch.
4.16 SWITCH DETECT
WARNING (HP, IN)
Because a disconnected User Switch means there is no emergency-stop function, Curtiss-Wright recommend that Switch
Detect is always set to On. Curtiss-Wright will accept no liability for any losses resulting from any other setting of this
parameter.
4.17 USER SWITCH DETECT
WARNING (HP, IN)
For a truly fail-safe system, Curtiss-Wright recommend that a User Switch incorporating a resistor network is fitted. Curtiss-
Wright accept no liability for losses of any kind arising from the use of any other switch.
4.18 9-WAY SID SWITCH DETECT
WARNING (HP, IN)
For a truly fail-safe system, Curtiss-Wright recommend that switches incorporating a resistor network are fitted to the 9-Way
SID ports. Curtiss-Wright accept no liability for losses of any kind arising from the use of any other switches.

Table of Contents