Curtiss-Wright R-NET OMNI2 - 6 Deleting IR Codes

Curtiss-Wright | PG Drives Technology
SK81935-01
88 | R-net Omni2 Technical Manual | Chapter 5 – Infrared Control
6 DELETING IR CODES
To delete an IR Code for a specific Command, highlight the specific Command in the Appliance menu and press the right
button. Then select the Delete Code option.
To delete all IR Codes for an Appliance select Delete All Codes within that Appliance’s sub-menu.
NOTE (HP, IN)
When deleting all learnt Codes for a specific Appliance, the Omni2 must be power-cycled to actually delete the Codes.